| View previous topic :: View next topic |
| Author |
Message |
cubanix
Joined: 24 May 2008
Posts: 139
|
| Posted: 7/30/08 4:22PM Post subject: little dissapointed at SEIBON |
|
|
since I've purchased the CF rear spoiler and hood, I've decided to be proactive . I called seibon yesterday and asked if they are going to make a CF lower front lip kit .... they said no :tap: , aaaaaand not planning to make them in the future...
does anybody know another company that makes them or could make them??
I might end up buying the material and have someone in the shop design it for me.
thanks |
|
| Back to top |
|
az_pinoy
Joined: 22 Sep 2003
Posts: 820
Location: Mesa/Apache Junction, AZ
|
| Posted: 7/30/08 4:36PM Post subject: |
|
|
hey cubanix...try absdynamics...they were one of the companies that came out with the CF lip kit for the XB1...that'll be nice if they made some for ours!
JC |
|
| Back to top |
|
cubanix
Joined: 24 May 2008
Posts: 139
|
| Posted: 7/30/08 4:45PM Post subject: |
|
|
az_pinoy wrote: hey cubanix...try absdynamics...they were one of the companies that came out with the CF lip kit for the XB1...that'll be nice if they made some for ours!
JC
I just called them and they said :no: thanks though |
|
| Back to top |
|
08SWbox
Joined: 15 Jun 2008
Posts: 165
Location: Corona, CA
|
| Posted: 7/31/08 11:29PM Post subject: |
|
|
i dont like Seibon's work anyways. Every hood that i have seen from them the resin has turned yellow from sun damage. They dont put enough clear on their hoods i guess.
As for the CF front lip, I have a guy that i do some work through who actually makes carbon fiber parts. Im going to take him the 5-axis lip once i get it and see if he can replicate it in CF for a decent amount of money...
Once the first one is dont, other designs should be pretty easy. |
|
| Back to top |
|
NoLimitzInd
Joined: 30 Jun 2005
Posts: 2205
Location: Arizona
|
| Posted: 8/1/08 5:57AM Post subject: |
|
|
| If you clear bra the hood you wont have the yellowing effect on them. I talked to them also. I have all the parts they make for the xB. I was hoping they would make the peice that goes over the license plate in the rear, but they are not making it. |
|
| Back to top |
|
ShaffNasty
Joined: 22 Jan 2008
Posts: 752
Location: LKWD in Killer Kali
|
| Posted: 8/1/08 8:32AM Post subject: |
|
|
| D_Unit has a guy in the Bay area that makes Cf parts or overlays them... |
|
| Back to top |
|
D_Unit
Joined: 05 Nov 2007
Posts: 644
|
| Posted: 8/1/08 9:06AM Post subject: |
|
|
ShaffNasty wrote: D_Unit has a guy in the Bay area that makes Cf parts or overlays them...
Correction... My carbon fiber guy is actually in Arizona. All you have to do is email him what you want done and include a pic so he can give you an estimate. He'll then quote you a price to overlay the part you want and will include shipping the part back to you.
Again, his email is roguemotorsports@gmail.com and his name is Jim. Please let him know that Darren referred you. It's not that easy having a carbon fiber hookup and this guy is available and does nice work for good prices. |
|
| Back to top |
|
cubanix
Joined: 24 May 2008
Posts: 139
|
| Posted: 8/1/08 2:16PM Post subject: |
|
|
| you guys been tons of help.. gonna email soon. thanks!! |
|
| Back to top |
|
Cuthbert
Joined: 02 Sep 2005
Posts: 418
Location: Phoenix, Az
|
| Posted: 8/16/08 11:20PM Post subject: |
|
|
NoLimitzInd wrote: If you clear bra the hood you wont have the yellowing effect on them. I talked to them also. I have all the parts they make for the xB. I was hoping they would make the peice that goes over the license plate in the rear, but they are not making it.
What's your opinion on the fitment of the hatch? Factory struts work ok? I was waiting to get it until I talked to someone that had already put it on. If someone doesn't make a matching cover for above the license plate I may not do it though. It is worse for you having a silver car than me having a black car though:) Did you paint yours or just leave it silver? |
|
| Back to top |
|
xseveredveganx
Joined: 15 Aug 2007
Posts: 1721
Location: City of Salt, Utah
|
| Posted: 8/17/08 4:30PM Post subject: |
|
|
Cuthbert wrote: NoLimitzInd wrote: If you clear bra the hood you wont have the yellowing effect on them. I talked to them also. I have all the parts they make for the xB. I was hoping they would make the peice that goes over the license plate in the rear, but they are not making it.
What's your opinion on the fitment of the hatch? Factory struts work ok? I was waiting to get it until I talked to someone that had already put it on. If someone doesn't make a matching cover for above the license plate I may not do it though. It is worse for you having a silver car than me having a black car though:) Did you paint yours or just leave it silver?
If there's a place in your town that makes vinyl stickers and graphics, you could have them wrap the license garnish with some carbonfiber vinyl. It may not be 100%, but it'll be more what you're after. |
|
| Back to top |
|
Cuthbert
Joined: 02 Sep 2005
Posts: 418
Location: Phoenix, Az
|
| Posted: 8/17/08 5:36PM Post subject: |
|
|
08SWbox wrote: i dont like Seibon's work anyways. Every hood that i have seen from them the resin has turned yellow from sun damage. They dont put enough clear on their hoods i guess.
As for the CF front lip, I have a guy that i do some work through who actually makes carbon fiber parts. Im going to take him the 5-axis lip once i get it and see if he can replicate it in CF for a decent amount of money...
Once the first one is dont, other designs should be pretty easy.
Weird, I have seen that with a lot of VIS hoods and other hoods that use gel coat, but not with regular clear coat(what seibon uses). |
|
| Back to top |
|
Cuthbert
Joined: 02 Sep 2005
Posts: 418
Location: Phoenix, Az
|
| Posted: 8/17/08 5:36PM Post subject: |
|
|
xseveredveganx wrote: Cuthbert wrote: NoLimitzInd wrote: If you clear bra the hood you wont have the yellowing effect on them. I talked to them also. I have all the parts they make for the xB. I was hoping they would make the peice that goes over the license plate in the rear, but they are not making it.
What's your opinion on the fitment of the hatch? Factory struts work ok? I was waiting to get it until I talked to someone that had already put it on. If someone doesn't make a matching cover for above the license plate I may not do it though. It is worse for you having a silver car than me having a black car though:) Did you paint yours or just leave it silver?
If there's a place in your town that makes vinyl stickers and graphics, you could have them wrap the license garnish with some carbonfiber vinyl. It may not be 100%, but it'll be more what you're after.
Yeah, I have seen a few different kinds of cf vinyl, but on top of real cf it is very easy to tell that it's fake. I could buy a small sheet of real cf and mold it and clear it, but that's a decent amount of work and would likely cost more than buying a pre-manufactured part. I'm still debating whether or not I want to do the hatch period though, don't want to go overboard with the cf. |
|
| Back to top |
|
AVODude
Joined: 10 Jul 2008
Posts: 34
Location: 420 Dezert
|
| Posted: 8/28/08 9:32AM Post subject: Seibon rear hatch |
|
|
Cuthbert wrote: NoLimitzInd wrote: If you clear bra the hood you wont have the yellowing effect on them. I talked to them also. I have all the parts they make for the xB. I was hoping they would make the peice that goes over the license plate in the rear, but they are not making it.
What's your opinion on the fitment of the hatch? Factory struts work ok? I was waiting to get it until I talked to someone that had already put it on. If someone doesn't make a matching cover for above the license plate I may not do it though. It is worse for you having a silver car than me having a black car though:) Did you paint yours or just leave it silver?
I installed the rear hatch and it fits really nice as good as the factory piece. i paid a glass company to come out remove the rear glass ($150.00) and wait while i installed the rear hatch again it took about 2 hours to do the entire job but man is it sweet!! the rear struts work fine and there are no issues with fitment of the rear wiper (if you choose to install it) or any of the other wiring and assorted BS back there. |
|
| Back to top |
|
NoLimitzInd
Joined: 30 Jun 2005
Posts: 2205
Location: Arizona
|
| Posted: 8/29/08 3:40PM Post subject: |
|
|
Cuthbert wrote: NoLimitzInd wrote: If you clear bra the hood you wont have the yellowing effect on them. I talked to them also. I have all the parts they make for the xB. I was hoping they would make the peice that goes over the license plate in the rear, but they are not making it.
What's your opinion on the fitment of the hatch? Factory struts work ok? I was waiting to get it until I talked to someone that had already put it on. If someone doesn't make a matching cover for above the license plate I may not do it though. It is worse for you having a silver car than me having a black car though:) Did you paint yours or just leave it silver?
The fitment is great. I had a glass guy come out and swap the glass for me also. He cut the glass out of my old hatch while it was on the car and then while he was cleaning it, I put the new hatch on. Then he put the glass back in. Took about a hour total.
The silver peice has actually grown on me. Makes the CF really stand out. I actually like it better being silver then the ones with all CF. |
|
| Back to top |
|
AVODude
Joined: 10 Jul 2008
Posts: 34
Location: 420 Dezert
|
| Posted: 9/3/08 8:59AM Post subject: rear hatch |
|
|
Here is the rear Seibon CF hatch with the factory color insert.
|
|
| Back to top |
|
D_Unit
Joined: 05 Nov 2007
Posts: 644
|
| Posted: 9/3/08 9:03AM Post subject: Re: rear hatch |
|
|
AVODude wrote: Here is the rear Seibon CF hatch with the factory color insert.
Bravo :bow: ... That came out nice. How was the install? |
|
| Back to top |
|
Beckenbauer
Joined: 29 May 2008
Posts: 120
Location: Murfreesboro, TN
|
| Posted: 9/3/08 10:10AM Post subject: |
|
|
| that looks sick...this is a must now for my SW! |
|
| Back to top |
|
cubanix
Joined: 24 May 2008
Posts: 139
|
| Posted: 9/3/08 5:45PM Post subject: |
|
|
| looks awesome man!!. like a new pair of jeans!!! |
|
| Back to top |
|
NoLimitzInd
Joined: 30 Jun 2005
Posts: 2205
Location: Arizona
|
| Posted: 9/4/08 7:24AM Post subject: |
|
|
| So you drilled and put the rear wiper back in? |
|
| Back to top |
|
Beckenbauer
Joined: 29 May 2008
Posts: 120
Location: Murfreesboro, TN
|
| Posted: 9/4/08 7:29AM Post subject: |
|
|
| o crap i didn't even see that haha...i don't like the hatch with the wiper. S*** i don't even use mine at all. lol hey nolimitz r u gona sell these cf products at all? |
|
| Back to top |
|
| |