Navi Hack with Switch - How it really works
Click here to go to the original topic

 
       Forum Index -> Scion xB 2nd-Gen ICE & Interior
View previous topic :: View next topic  
Author Message
CheapChic



Joined: 26 May 2007
Posts: 224
Location: Cleveland, Ohio

Posted: 8/6/08 3:02PM    Post subject: Navi Hack with Switch - How it really works  

Hi

Just did the switch navi hack, it interrupts the VSS wire, so you don't get greyed out.

One thing, if you do it while on a destination, it does not reflect accurate turns or position. they are off until it does a recalc I thought the Navi used satellites and not just the VSS wire for it position and travel.

Anyone else have this and what have your found.
Back to top  
nakamaco



Joined: 14 Jun 2006
Posts: 5

Posted: 8/10/08 8:47AM    Post subject:  

I have had the same problem and still haven't been able to fix it. You ever find the fix for that problem?
Back to top  
CheapChic



Joined: 26 May 2007
Posts: 224
Location: Cleveland, Ohio

Posted: 8/10/08 11:40AM    Post subject:  

nakamaco wrote: I have had the same problem and still haven't been able to fix it. You ever find the fix for that problem?

Yes, i fixed it.

after you hack and all done ready for use, disconnect the negative battery out in clear view of the sky.

wait 10 minutes,

reconnect and turn on the car. you do no have to start it, just so the navi is on and able to load and sit for 15 minutes. this is only done once to reset the Navi

You car has to gather satelite information and then it works OK,

also, it take about 1/4 mile for it to adjust after you turn on the VSS again.

works great now. LOVE IT!!!!
Back to top  
lvbitwiz



Joined: 09 Aug 2006
Posts: 910
Location: Scion Apocalypse Vegas

Posted: 8/10/08 12:13PM    Post subject:  

CheapChic wrote: nakamaco wrote: I have had the same problem and still haven't been able to fix it. You ever find the fix for that problem?

Yes, i fixed it.

after you hack and all done ready for use, disconnect the negative battery out in clear view of the sky.

wait 10 minutes,

reconnect and turn on the car. you do no have to start it, just so the navi is on and able to load and sit for 15 minutes. this is only done once to reset the Navi

You car has to gather satelite information and then it works OK,

also, it take about 1/4 mile for it to adjust after you turn on the VSS again.

works great now. LOVE IT!!!!

:clap:
Back to top  
 
       Forum Index -> Scion xB 2nd-Gen ICE & Interior
1 of 1
phpBB Search Engine Indexer